Nuclear Regulatory Commission approves new Plant Vogtle nuclear reactors

Project involves adding two units

  • Follow Metro

The Nuclear Regulatory Commission on Thursday approved the design certification for the Westinghouse AP1000 reactors, clearing a final hurdle in the process to license and build two new units at Plant Vogtle.

“This is another key milestone for the Vogtle project and the nation’s nuclear renaissance,” Southern Co. Chairman Thomas A. Fanning said. “The NRC’s action confirms the AP1000 design is safe and meets all regulatory requirements.”

The $14.8 billion Vogtle project involves adding two AP1000 units to the existing ones at the power generating plant in Burke County.

The NRC has already evaluated the company’s request for an operating license that would authorize both the construction and operation of the first new commercial nuclear power reactors to be built in the U.S. in a generation.

The license could not be issued, however, until the NRC resolved all issues related to the AP1000 design.

“The commission now has all of the technical information needed to issue the Vogtle combined operating license,” Fanning said in a prepared statement.

Although preliminary site work has been under way for several years, the receipt of the operating license will set in motion a nuclear construction program that would bring the Unit 3 online in 2016 and Unit 4 online in 2017.

The AP1000 includes new features such as a passive cooling system in which cooling water stored above the reactor can be fed into the unit by gravity flow – without electricity, pumps or other traditional safeguards – in the event of an emergency.

Although the units have never been built in the U.S., there are four AP1000 units under construction in China.

The Sanmen I nuclear reactor in China’s Zhejiang province, more than 10,000 miles from Burke County, is about two years ahead of Vogtle in its construction schedule and is expected to become the world’s first AP1000 unit to go online when it is completed in 2013.

South Carolina Electric & Gas Co. also issued a statement Thursday praising the NRC for its steps in certifying the AP1000, which will be used in a second nuclear expansion at SCANA Corp.’s V.C. Summer Plant in South Carolina.

“Receiving final approval of the AP1000 design reaffirms our selection of this technology, which has undergone rigorous reviews to demonstrate that its design meets all regulatory requirements,” said Kevin Marsh, the chairman and CEO of SCANA.

SCE&G and its partner, Santee Cooper, anticipate receiving operating licenses this year or early in 2012 for units 2 and 3 in Jenkinsville, S.C., about 25 miles northwest of Columbia.

About 1,000 employees are engaged in pre-construction work at V.C. Summer, and about 1,750 workers are involved in similar activities at the Vogtle site in Georgia.

In addition to approving the reactor’s final design, the NRC also streamlined the process by which that certification goes into effect. It made the ruling effective immediately upon publication in the Federal Register, which will occur within seven business days.

NRC rules normally become effective 30 days after publication.


An Augusta-area ironworkers union chapter received a $30,000 grant to purchase specialized welding equipment that will be used to train workers for tasks related to the addition of two new reactors at Plant Vogtle.

The grant from the Ironworker Management Progressive Action Cooperative was used to buy three pulse arc welding machines from Lincoln Electric Co. to train members of Local 709 for the specialized welding needed at the Vogtle site.

The type of welding, referred to as GMAW-P, is a special form of gas-shielded arc welding. The welders are also being trained to weld from remote locations.

– Rob Pavey, staff writer

Comments (5) Add comment
ADVISORY: Users are solely responsible for opinions they post here and for following agreed-upon rules of civility. Posts and comments do not reflect the views of this site. Posts and comments are automatically checked for inappropriate language, but readers might find some comments offensive or inaccurate. If you believe a comment violates our rules, click the "Flag as offensive" link below the comment.
TK3 12/22/11 - 01:41 pm
Great, we get to build a copy

Great, we get to build a copy of the Chinese design? That makes me feel about as safe as the American design by G.E. that help waste part of Japan this last year.

Sorry folks but Nuke power will NEVER be safe enough to run your T.V. and A/C, etc., but it appears the Powers That Be" care less.

southern 12/22/11 - 02:03 pm
Nuclear Energy is here to

Nuclear Energy is here to stay. Its safe, its clean and its American.

robaroo 12/23/11 - 01:32 am
The AP1000 is an American

The AP1000 is an American design all the way, from a company that has been in the nuclear power business from the beginning.

The Japanese reactors are an older model. By the way, what did them in was a combination of things exceedingly unlikely in Burke County - a massive earthquake immediately followed by a Tsunami. TEPCO's reactors survived the earthquake. They were doing OK until the Tsunami submerged the diesel engine powered generators.

SCEagle Eye
SCEagle Eye 12/23/11 - 10:30 am
If this reactor is so

If this reactor is so wonderful and safe, why is Southern Company dodging all risk, which it is dumping it on tax payers and rate payers? You have to wonder about a business model and a political system that allows such risk avoidance, while allowing large profits by nuclear monopolies.

Back to Top
Search Augusta jobs