NRC says backup safety system at Oconee Nuclear Station wouldn't have worked if needed

Plant's backup safety system was not working, NRC says

COLUMBIA — A backup safety system at a South Caro­lina nuclear plant wouldn’t have worked if it had been needed, federal regulators said Wednesday, a finding that means increased oversight and inspection from the Nuclear Regulatory Comm­ission.


This summer, engineers at Duke Energy’s Oconee Nuclear Station, about 30 miles west of Greenville, determined that pressurized heater breakers used in the station’s standby shutdown facility were not working properly. That facility is designed to shut down the plant in case something like a tornado or flood means that normal shutdown modes can’t be used.

NRC officials inspected the plant, notifying Duke in September of problems with the heater breakers and meeting with company officials last month to discuss safety issues. On Wednesday, the agency said the issue merited a “yellow” rating, its second-most severe safety level.

The pressurized heater breakers that caused the problems were replaced by fuses and fuse boxes that can withstand higher heat and temperatures, Oconee officials have said. The changes were made in all three of Oconee’s units.

The NRC said a second violation involving the replacement breakers was classified as “green,” or of very low safety significance.

Oconee spokeswoman Sandra Magee says the problem was fixed promptly, and Duke is not appealing the findings.

“We’ve taken care of that,” Magee said. “They are good to go.”

NRC officials are coming back to Oconee in January for a follow-up inspection. The public was never in danger because the system wasn’t needed, the NRC said.


Sun, 08/20/2017 - 19:03

Program paves way for medical school

Sun, 08/20/2017 - 21:19

Clouds could mar eclipse view for some